Exposed Fastener System
System Depth = 1”
Joint Width = 3/8”
System Depth = 1”
Joint Width = 3/8”
System Components:
1. EQUITONE Panel
2. Universe Aluminum J-Extrusion - Black Color
3. Universe Aluminum Hat-Extrusion – Black Color
4. Extrusion Fastener
5. Panel Rivet – Color Matched
6. Foam Tape (Shop Attached)
7. Air & Moisture Barrier
8. Sheathing
9. Backing Plate/Strapping
10. 16 Gauge Min. Steel Stud
2. Universe Aluminum J-Extrusion - Black Color
3. Universe Aluminum Hat-Extrusion – Black Color
4. Extrusion Fastener
5. Panel Rivet – Color Matched
6. Foam Tape (Shop Attached)
7. Air & Moisture Barrier
8. Sheathing
9. Backing Plate/Strapping
10. 16 Gauge Min. Steel Stud
Notes:
• Vertically attached.
• Backing plate/strapping (9) is required behind vertical extrusions if stud wall construction is used and the studs do not align with the vertical extrusions.
• Vertically attached.
• Backing plate/strapping (9) is required behind vertical extrusions if stud wall construction is used and the studs do not align with the vertical extrusions.