Exposed Fastener Rainscreen System
System Depth = 1” + Zee Girt
Joint Width = 3/8”
Joint Width = 3/8”
System Components:
1. Trespa® Meteon® Panel
2. Universe Slotted Aluminum Z-Extrusion – Black Color
3. Universe Slotted Aluminum Hat Extrusion – Black Color
4. Extrusion Fastener
5. Panel Fastener
6. 1/4” Thermal Isolator
7. Zee Girt
8. Mineral Wool Insulation
9. Air & Moisture Barrier
10. CMU
2. Universe Slotted Aluminum Z-Extrusion – Black Color
3. Universe Slotted Aluminum Hat Extrusion – Black Color
4. Extrusion Fastener
5. Panel Fastener
6. 1/4” Thermal Isolator
7. Zee Girt
8. Mineral Wool Insulation
9. Air & Moisture Barrier
10. CMU
Notes:
• Horizontally attached across framing.
• Insulation (8) must be mineral wool. Foam plastic insulation triggers NFPA-285 fire code which requires a tested assembly. The only other option is to acquire an AHJ approval. Receiving an AHJ approval is not guaranteed. It must be the same depth as the zee girt (7).
• Air & Moisture barrier (9) must be VaproShield® WallShield®, WrapShield®, RevealShield™, Cosella-Dorken Delta® Fassade-S, Delta® Foxx, Delta® Foxx-S, Tyvek® CommercialWrap®, Dow Corning DefendAir 200 or Momentive™ SEC2500-SilShield AWB if mineral wool (8) is less than 2” thick; if mineral wool is thicker than 2” then other barriers may be used.
• Extrusions (2) (3) have ventilation slotting and splices for support between studs.
• The zee girt (7) is not painted.
• Painted and decorative panel fasteners (5) are available for a premium.
• Horizontally attached across framing.
• Insulation (8) must be mineral wool. Foam plastic insulation triggers NFPA-285 fire code which requires a tested assembly. The only other option is to acquire an AHJ approval. Receiving an AHJ approval is not guaranteed. It must be the same depth as the zee girt (7).
• Air & Moisture barrier (9) must be VaproShield® WallShield®, WrapShield®, RevealShield™, Cosella-Dorken Delta® Fassade-S, Delta® Foxx, Delta® Foxx-S, Tyvek® CommercialWrap®, Dow Corning DefendAir 200 or Momentive™ SEC2500-SilShield AWB if mineral wool (8) is less than 2” thick; if mineral wool is thicker than 2” then other barriers may be used.
• Extrusions (2) (3) have ventilation slotting and splices for support between studs.
• The zee girt (7) is not painted.
• Painted and decorative panel fasteners (5) are available for a premium.
