Rainscreen System
System Depth = 2 ¼” + Zee Girt
Joint Width = 5/8”
System Components:
1. ALPOLIC® Panel
2. Universe Panel Extrusion
3. Extruded Snap-in Retainer
4. Extrusion Fastener
5. Spline Angles and Pop Rivets
6. Aluminum Stiffener
7. Structural Adhesive
8. ¼” Thermal Isolator
9. Zee Girt
10. Mineral Wool or Polyisocyanurate Insulation
11. Air and Moisture Barrier
12. Line of Structure
2. Universe Panel Extrusion
3. Extruded Snap-in Retainer
4. Extrusion Fastener
5. Spline Angles and Pop Rivets
6. Aluminum Stiffener
7. Structural Adhesive
8. ¼” Thermal Isolator
9. Zee Girt
10. Mineral Wool or Polyisocyanurate Insulation
11. Air and Moisture Barrier
12. Line of Structure
Notes:
• Pressure equalized rain screen system.
• Non-Progressive Installation – allows for individual panel replacement and allows sequence flexibility.
• Air & moisture barrier (11) required for weather tight system.
• Unlimited color choice for extruded snap-in retainer (3).
• System has passed air, water and structural tests.
• Flashing may be required at the base of the system.
• For steel stud construction, 16 gauge min. is required.
• Insulation (10) must be polyisocyanurate or mineral wool in order to be NFPA-285 fire code compliant. If polyisocyanurate is used, the ACM is required to be FR core.
• Pressure equalized rain screen system.
• Non-Progressive Installation – allows for individual panel replacement and allows sequence flexibility.
• Air & moisture barrier (11) required for weather tight system.
• Unlimited color choice for extruded snap-in retainer (3).
• System has passed air, water and structural tests.
• Flashing may be required at the base of the system.
• For steel stud construction, 16 gauge min. is required.
• Insulation (10) must be polyisocyanurate or mineral wool in order to be NFPA-285 fire code compliant. If polyisocyanurate is used, the ACM is required to be FR core.
