Wet Seal System
System Depth = 1 ¼” + Universe Continuous Insulation System (1” to 3” thick as indicated on drawings)
Joint Width = 1/2”
Joint Width = 1/2”
System Components:
1. ALPOLIC® Panel
2. Universe Panel Extrusion
3. Extrusion Fastener
4. Extruded Backer Rod
5. Backer Rod Fastener
6. Joint Sealant
7. Aluminum Stiffener
8. Structural Adhesive
9. ¼” Thermal Isolator
10. Continuous Insulation Vertical Aluminum Tube Framing
11. Aluminum Tube Framing Fastener; attaches through insulation to substrate
12. Polyisocyanurate Insulation
13. Line of Structure
Notes:
• Field applied joint sealant (6) is required for the system to be weather tight.
• Non-Progressive Installation – allows for individual panel replacement and allows sequence flexibility.
• Economical and versatile system adaptable to complex designs.
• System has passed air, water and structural tests.
• For steel stud construction, 16 gauge min. is required.
• Insulation (12) must be polyisocyanurate in order to be NFPA-285 fire code compliant and provide the required rigidity for the framing to attach against.
2. Universe Panel Extrusion
3. Extrusion Fastener
4. Extruded Backer Rod
5. Backer Rod Fastener
6. Joint Sealant
7. Aluminum Stiffener
8. Structural Adhesive
9. ¼” Thermal Isolator
10. Continuous Insulation Vertical Aluminum Tube Framing
11. Aluminum Tube Framing Fastener; attaches through insulation to substrate
12. Polyisocyanurate Insulation
13. Line of Structure
Notes:
• Field applied joint sealant (6) is required for the system to be weather tight.
• Non-Progressive Installation – allows for individual panel replacement and allows sequence flexibility.
• Economical and versatile system adaptable to complex designs.
• System has passed air, water and structural tests.
• For steel stud construction, 16 gauge min. is required.
• Insulation (12) must be polyisocyanurate in order to be NFPA-285 fire code compliant and provide the required rigidity for the framing to attach against.