Exposed Fastener Rainscreen System
System Depth = 1”
Joint Width = 3/8”
Joint Width = 3/8”
System Components:
1. Trespa® Meteon® Panel
2. Universe Aluminum J-Extrusion – Black Color
3. Universe Aluminum Hat-Extrusion – Black Color
4. Extrusion Fastener
5. Panel Fastener
6. Air & Moisture Barrier
7. Sheathing
8. Backing Plate/Strapping
9. 16 Gauge Min. Steel Stud
2. Universe Aluminum J-Extrusion – Black Color
3. Universe Aluminum Hat-Extrusion – Black Color
4. Extrusion Fastener
5. Panel Fastener
6. Air & Moisture Barrier
7. Sheathing
8. Backing Plate/Strapping
9. 16 Gauge Min. Steel Stud
Notes:
• Vertically attached.
• Air & Moisture barrier (6) must be VaproShield® WallShield®, WrapShield®, RevealShield™, Cosella-Dorken Delta® Fassade-S, Delta® Foxx, Delta® Foxx-S, Tyvek® CommercialWrap®, Dow Corning DefendAir 200 or Momentive™ SEC2500-SilShield AWB.
• Backing plate/strapping (8) is required behind vertical extrusions if stud wall construction is used and the studs do not align with the vertical extrusions.
• Painted and decorative panel fasteners (5) are available for a premium.
• Air & Moisture barrier (6) must be VaproShield® WallShield®, WrapShield®, RevealShield™, Cosella-Dorken Delta® Fassade-S, Delta® Foxx, Delta® Foxx-S, Tyvek® CommercialWrap®, Dow Corning DefendAir 200 or Momentive™ SEC2500-SilShield AWB.
• Backing plate/strapping (8) is required behind vertical extrusions if stud wall construction is used and the studs do not align with the vertical extrusions.
• Painted and decorative panel fasteners (5) are available for a premium.
