System Depth = 2 ¼”
Joint Width =1/2”
2. Universe Panel Extrusion
3. Extrusion Fastener
4. Extruded Backer Rod and Fastener
5. Joint Sealant
6. Silicone Gasket
7. Aluminum Stiffener
8. Structural Adhesive
9. ¼” Thermal Isolator
10. Line of Structure
• Extruded dry cure gasket (6) over wet seal reveal joint (5) for weather tightness.
• Non-Progressive Installation – allows for individual panel replacement and allows sequence flexibility.
• Economical alternative to a dry set system.
• The Gasket (6) is black unless otherwise noted. Custom colors are available for a premium.
• Gasket (6) must be set in when the joint sealant (5) is wet.
• System has passed air, water and structural tests.
• For steel stud construction, 16 gauge min. is required.